In my datalogs, for the column for E85 fuel correction, all the numbers are 100. I'm using pure gasoline. I'm having a lean condition problem and I'm wondering if this might be my problem. Should the datalog numbers in the E85 fuel correction column read 0 or 100 when running pure gasoline? If I need to change it to 0 correction, how do I make the change?
Thanks,
Gary
Question re: fuel correction
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Question re: fuel correction
Are you running a flex fuel sensor?
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Question re: fuel correction
The set "Flex Fuel Sensor" to "Disabled." It will ignore all flex fuel related settings.
-
Chips60bug
- MegaSquirt Newbie
- Posts: 4
- Joined: Sun Mar 16, 2008 8:47 am
Re: Question re: fuel correction
i don't see the column for E-85 fuel correction and I would like too. How do i make that happen, is it a default on Megalogviewer? I do have the sensor and would like to see if it is actually working. BTW i have MS2 Extra 2.0 Thanks,
Chip
Chip
Re: Question re: fuel correction
It's in the Megatune datalog, an Excel file.i don't see the column for E-85 fuel correction and I would like too. How do i make that happen, is it a default on Megalogviewer?
Gary