Page 1 of 1
gas line plumbing on V-8
Posted: Mon Apr 13, 2009 4:27 pm
by luv2trade442
I'm wondering about the line plumbing on a 455 Olds wwith 32 lb injectors, at 45 lbs. pressure, its got a good street cam and will not be heavly raced or anything. Do i have to split the fuel lines before going into the fuel rails or can i go in the first fuel rail and then the second and then to the requlator. Wondering if that setup starves any of the injectors. THX much
Re: gas line plumbing on V-8
Posted: Tue Apr 14, 2009 5:47 am
by Matt Cramer
Our Nova test mule is currently running a Holley Stealth Ram that's plumbed up in a U shape like how you describe. Hasn't caused us any particular trouble. As long as the rails are large enough inside I don't expect it to be a problem.
Re: gas line plumbing on V-8
Posted: Fri Apr 17, 2009 7:22 am
by devastator
I know my engine is only 130 Cu in., but with the turbo and E85, I use almost as much fuel as a "big" engine, and I have my fuel rails plumbed the same way you suggested, without any problems.