Trigger wheel installed on a VW T4 aircooled engine

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
msoultan
Helpful Squirter
Posts: 58
Joined: Sun Jun 27, 2004 11:04 am
Location: Long Beach, CA - USA

Trigger wheel installed on a VW T4 aircooled engine

Post by msoultan »

Thought you all might like to see how I mounted my trigger wheel on my bus engine:

http://shoptalkforums.com/viewtopic.php?p=946486#946486

Enjoy!
Mike
Top
LeslieTroyer
Helpful Squirter
Posts: 35
Joined: Tue Nov 20, 2007 11:46 am

Re: Trigger wheel installed on a VW T4 aircooled engine

Post by LeslieTroyer »

nice, my T4 build is way way out there...

LEs
Top
msoultan
Helpful Squirter
Posts: 58
Joined: Sun Jun 27, 2004 11:04 am
Location: Long Beach, CA - USA

Re: Trigger wheel installed on a VW T4 aircooled engine

Post by msoultan »

Do you think that VR sensor is going to get too hot where it's mounted? I didn't know how hot the air is that's coming out of the oil cooler...
Top
Post Reply

Return to “Wiring and Sensors”