I have a inline 6, 6 low impedence 440cc injectors. so 2 x 3 batch fire, on the diagram i have shows 2 x 2 injectors, with 2 5amp fuses and 1 2amp fuse, should i use the same configuration or increase the fuse amperage since im running 6 injectors? how should i run this
also what resistor?
6 injector fuse / resistor selection
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
6 injector fuse / resistor selection
1986 toyota cressida
5m-gte 2.8 L6
MS-2 3.57 edis 6,
5m-gte 2.8 L6
MS-2 3.57 edis 6,
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: 6 injector fuse / resistor selection
Depends on whether you are using current limiting resistors or PWM current limiting. What board version do you have?
Re: 6 injector fuse / resistor selection
v3.57 ms-2
1986 toyota cressida
5m-gte 2.8 L6
MS-2 3.57 edis 6,
5m-gte 2.8 L6
MS-2 3.57 edis 6,
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: 6 injector fuse / resistor selection
A V3.57 will let you either use resistors or PWM current limiting. I'd go PWM first without resistors.