No injector pulse
Posted: Wed Sep 09, 2009 5:10 am
I am having a problem with my MSII v3.0, I have no injector pulse while cranking. I have good voltage to the injectors, but the unit is not supplying a ground and will not light my noid light. I checked to see if it is supplying a ground out of the unit at the plug and it is not. I have a crank signal while cranking and it appears to be commanding a pulse width but is not firing the injectors. I know I probaly made a stupid mistake on one of the settings, I was just hoping someone can tell me where I may have gone wrong. Thanks. Jim