For some reason I cant seem to load any the 2.xx code into the MSII. Initially I got the first version of MSII code v 1.0 a couple of years ago. I continued with my project a few weeks ago. I am using USB adaptor/ MS Download 2.00/ MSII w/ Board v2.2.
When I try to load v2.89 start loading and it always stops at 72% on early version 2.xx will stop at 95% or so.
I was only able to load v1.34 which now is working fine. Testing with simulator board.
I tried loading in different computers, same problem. Tried changing several setting on the port...nothing seems to load it.
any insight into this?
can't load 2.89 code in MSII V2.2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
richardriver
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Apr 25, 2005 10:41 am
- Location: VA USA
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: can't load 2.89 code in MSII V2.2
richardriver,
You can't load any v 2.xxx code on a v1 MS-II. The best way to perhaps determine the MS-IIâ„¢ version of any board is that the original boards had green LPI solder mask, where as the new V2 boards are now blue solder mask. So MegaSquirt-II version V1 is green, and the latest V2 (with CAN) is blue. The boards also have the "V2.0" or "V2.1" silkscreened onto the V1 boards and "V3.0" silk screened onto the V2 boards.
1.34 code is the latest (and last) code for the V1 MS-IIs.
There's more here: http://www.megamanual.com/ms2/code.htm
Lance.
You can't load any v 2.xxx code on a v1 MS-II. The best way to perhaps determine the MS-IIâ„¢ version of any board is that the original boards had green LPI solder mask, where as the new V2 boards are now blue solder mask. So MegaSquirt-II version V1 is green, and the latest V2 (with CAN) is blue. The boards also have the "V2.0" or "V2.1" silkscreened onto the V1 boards and "V3.0" silk screened onto the V2 boards.
1.34 code is the latest (and last) code for the V1 MS-IIs.
There's more here: http://www.megamanual.com/ms2/code.htm
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw