im only assuming but the MS triggers stuff threw a + i have a fan wired into the factory relay box and its triggered off when its grounded but the fan comes on when its open..
so in other words i need to be able to trigger a ground then open to turn the fan on.
thanks in advance
fan control
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
thecrew2999
- MegaSquirt Newbie
- Posts: 32
- Joined: Thu Aug 13, 2009 4:26 pm
Re: fan control
nevermind i found the awnser to my question...
i dont know if its just me or what but im having a heck of a time figuring out the guide on how to set up the spare ports...
i dont know if its just me or what but im having a heck of a time figuring out the guide on how to set up the spare ports...