MSII code question

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
WASyL
Helpful Squirter
Posts: 102
Joined: Tue Dec 16, 2008 7:46 am
Location: Warszawa - Poland

MSII code question

Post by WASyL »

I was just reading megamanual and accidentaly fond one thing that bothers me now. I use 2.89 (MSII) because according to http://www.megamanual.com/ms2/mt28.htm 2.89 is the latest code, but here http://www.megamanual.com/files/code/ i found V3.110 code, i cannot find any information on this code what are the differences and if i can use it with my MSII

best regards

p.s. soory if i choosed wrong board
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: MSII code question

Post by Matt Cramer »

V3.110 is beta code. It can work on an MSII but is somewhat experimental at the moment. It's mostly designed to add support for the Sequencer when it comes out.
Top
Bruce Bowling
Site Admin
Posts: 23
Joined: Mon Feb 16, 2004 4:25 pm
Location: Baltimore, MD

Re: MSII code question

Post by Bruce Bowling »

As Matt says the V3.xx code is a beta version.. its a "grand unification" of the MSII, microsquirt and sequencer code versions. The code is 100% operational and its what I am using for my engines and it works. In the near future we will update the docs to V3.xx code and this will replace the 2.8X version.

- Bruce
Top
WASyL
Helpful Squirter
Posts: 102
Joined: Tue Dec 16, 2008 7:46 am
Location: Warszawa - Poland

Re: MSII code question

Post by WASyL »

is there or will be any summary of changes :?:

best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Top
grippo
Site Admin
Posts: 286
Joined: Mon Feb 16, 2004 6:55 pm

Re: MSII code question

Post by grippo »

Absolutely. But as Matt said, most of the changes involve changes for the Sequencer and for CAN.
Top
WASyL
Helpful Squirter
Posts: 102
Joined: Tue Dec 16, 2008 7:46 am
Location: Warszawa - Poland

Re: MSII code question

Post by WASyL »

most, so that means there are changes also for standard usage of MS, will upgrade give me anything more than 2,89 on my SBC ??

best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Top
grippo
Site Admin
Posts: 286
Joined: Mon Feb 16, 2004 6:55 pm

Re: MSII code question

Post by grippo »

About the only thing that is of general use is a soft cut rev limit (randomly cuts fuel with increasing frequency as you go more over the limit). Also if you have VR input problems with toothed wheels, some of the code changes may help.
Top
WASyL
Helpful Squirter
Posts: 102
Joined: Tue Dec 16, 2008 7:46 am
Location: Warszawa - Poland

Re: MSII code question

Post by WASyL »

nope no problems there so i will stick with 2,89, thanks for all info

best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Top
Post Reply

Return to “General Information”