Dear All
Just had a little re-wire for Christmas and need to know what to fuse the above coil at,anyone know?
John
P.S. I know the primary resistance is 0.8 ohms which works out at 16amps D.C.?
Ford four post coil
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
Re: Ford four post coil
That sounds like an EDIS-4/8 coil?
I had one and measured 0.56Ohm and 5.6mH. I plugged this into LTSpice and got the attached graph (for a 12V pulse).
I doubt you would need more than 4ms of charge time and then the current hits 7A. I recon a 10A fuse will do.
I had one and measured 0.56Ohm and 5.6mH. I plugged this into LTSpice and got the attached graph (for a 12V pulse).
I doubt you would need more than 4ms of charge time and then the current hits 7A. I recon a 10A fuse will do.
You do not have the required permissions to view the files attached to this post.
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.