Need help with a single cylinder ECU
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
rcman50166
- MegaSquirt Newbie
- Posts: 1
- Joined: Thu Mar 25, 2010 1:25 pm
Need help with a single cylinder ECU
Honestly, I do not know much about EFI. I know the theory behind how it works and its components, but I do not know much circuitry and programming. So I am asking for general help. What board do I get? How do I wire a single cylinder system? Is there even an ECU that can run a 148cc single cylinder Briggs and Stratton Engine? What about throttle bodies and all that? Where can I find fuel injector that can run at 12mL/min? Please help me with this. Thanks in advanced. I'm a mechanical engineer so this isn't my domain.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Need help with a single cylinder ECU
rcman50166,
You might want to start with the FAQ: http://www.megamanual.com/index.html and then read the manual: http://www.megamanual.com/mtabcon.htm.
You can also try searching the forums for "formula sae" and "briggs stratton" to see what other who are doing something similar have tried.
Lance.
You might want to start with the FAQ: http://www.megamanual.com/index.html and then read the manual: http://www.megamanual.com/mtabcon.htm.
You can also try searching the forums for "formula sae" and "briggs stratton" to see what other who are doing something similar have tried.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Need help with a single cylinder ECU
In addition to the links Lance posted, there's a couple accounts from people who have put MegaSquirt products on Briggs & Stratton engines in the Success Stories forum:
http://www.msruns.com/viewforum.php?f=97
You might be able to get an injector (and fuel pump if you're not pressurizing the tank with compressed air) from one of the newer 50 cc injected scooters.
http://www.msruns.com/viewforum.php?f=97
You might be able to get an injector (and fuel pump if you're not pressurizing the tank with compressed air) from one of the newer 50 cc injected scooters.
