MSefi.com read only forum (Jan.15,2018)

Hello from Finland. I´m new here (done much reading ) I found some topics about Exel calculator that would be helpfull to create ignition basemap.
Here is one example -> viewtopic.php?f=89&t=36506

But i havent found any links that actually have that exel file to download. So if someone have that "calculator" on hard-drive, please PM to me .

1031,

There's this one: It appears to be based on the advice here: http://www.megamanual.com/ms2/configure.htm#sparktable and http://www.megamanual.com/ms2/tune.htm#spark

Lance.

Lance. BIG thanks We are megasquirtting old rally car with 1600cc Ford Kent/crossflow engine. Car is running quite ok now, but those final tuning´s are still ahead. So now we have some more "tools" to do tuning (that exel calculator) .

Lance wrote:1031,

There's this one:

ignition_timing_setup_573.xls

It appears to be based on the advice here: http://www.megamanual.com/ms2/configure.htm#sparktable and http://www.megamanual.com/ms2/tune.htm#spark

Lance.

It seems to give me advance settings of up to 60 BTDC. Is this right?