I've pored thru the manual again, but cannot seem to find what some of the fidle variables or the corresponding values mean. The basic ones like temp, rpm, etc, are well explained but many others are not.
I have a device that I would like to actuate on start up for a specific period of time, possibly controlled by engine cycles like the ASE enrichment. But the variables in MT have me perplexed.
For example, there is a variable for tachCount, engine, and crank. Are those similar to engine cycles? What kind of values would go into the variables?
Is there another section of the manual that can help describe these things in more detail?
fidle variables
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: fidle variables
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
MustangSix
- MegaSquirt Newbie
- Posts: 7
- Joined: Thu May 27, 2004 4:46 am
Re: fidle variables
Perfect!