MSefi.com read only forum (Jan.15,2018)

MS2 v3
standard BG code
Got her running in my 4.0
Havent done a full install yet just running on the bench
Stock 89 renix 02 sensor shows 2.5 volts at stoic
Same slope as my lc1 wideband
Why cant i keep my sensor and just use a spare output port to kill the heater relay after warm up?
Checked the renix manual and it seems to behave just like a wideband.

That's odd, I thought this one would have a narrow band. But if you can confirm it has the same slope as an LC-1, I don't see why it wouldn't work.

The renix manual says when its rich, the voltage is less then 2.5. When lean, Its above.