Can't find Mega map sensor
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
desotohemibill
- MegaSquirt Newbie
- Posts: 5
- Joined: Mon Apr 19, 2010 5:35 pm
Can't find Mega map sensor
I have my Megasquirt system as ordered from DYIautotune. It says that it can work with boost up to 20 PSI boost before it would need a different MAP sensor. Now call me ignorant if you will, but I've worked on many vehicles and they all had hoses hooked from the MAP sensor to the intake system somewhere. I can't for the life of me find a hose fitting on this unit anywhere. Is there another unit I have to buy before my system is complete? I do have the V3 box, Megastim, supplied air and coolant temp sensors supplied, and cables so far. Thank you in advance to anyone that can straighten me out. Bill.
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: Can't find Mega map sensor
The MAP sensor is IN the MS box. On the DB37 (big connector) panel you'll find a ~ 1/4" hole; look inside and you'll see a barb fitting ending right there. That's your MAP sensor.
-
desotohemibill
- MegaSquirt Newbie
- Posts: 5
- Joined: Mon Apr 19, 2010 5:35 pm
Re: Can't find Mega map sensor
Thank you so much. Bill