v3 ignition
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
desotohemibill
- MegaSquirt Newbie
- Posts: 5
- Joined: Mon Apr 19, 2010 5:35 pm
v3 ignition
I have the V3 unit that I'm oputting on a V8. It has a distributor that I want to use to send spark to each plug in a normal fashion, but will use a trigger wheel for timing. I see on the V3 external wiring diagram that there is a wire going to an ignition module. Does it send a pulse 4 times per revolution to a coil, or do I need another system to add to my V3 setup? Thank you, Bill
-
Nitrobanshee
- MegaSquirt Newbie
- Posts: 9
- Joined: Mon Apr 24, 2006 8:51 am
- Location: NC.
Re: v3 ignition
What kind of motor do you have, and what kind of distributor does it have? Are you running MS1 or MS2
on the V3 board?
on the V3 board?
1995 Nissan Pickup truck running Megasquirt V2.2 MSII 2.881 EDIS with a turbo.
Dyno #s 354WHP 381Foot pounds
KA24E-t Power
Dyno #s 354WHP 381Foot pounds
KA24E-t Power