Grounds?
Posted: Sat Apr 23, 2011 5:23 am
Hello.
I am wiring up a MS2 v3.57 up to my 1993 EEC-IV harness via DIYBOB.
The MS2 harness has 6 black ground wires.
My EEC-IV has the following grounds - Case Ground (pin 20), Power Ground (pin 40), Power Ground (pin 60).
I believe all 3 of the EEC grounds go to the chassis. Do I put two MS ground on each EEC ground?
Thank You
Adam
I am wiring up a MS2 v3.57 up to my 1993 EEC-IV harness via DIYBOB.
The MS2 harness has 6 black ground wires.
My EEC-IV has the following grounds - Case Ground (pin 20), Power Ground (pin 40), Power Ground (pin 60).
I believe all 3 of the EEC grounds go to the chassis. Do I put two MS ground on each EEC ground?
Thank You
Adam