MSD blaster 3 coil settings
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
firefoxx04
- MegaSquirt Newbie
- Posts: 17
- Joined: Fri Jun 24, 2011 9:00 am
- Location: Michigan
MSD blaster 3 coil settings
i have dwell duration set to 3ms (MSD tech told me anything between 2.5 and 3ms)
he also told me that max spark duration should be 350ms.
i thought all was good until i looked at the tune im basing my tune off of, and the guy has his max spark duration set to .7ms
thats a BIG difference!!
so what is this setting and how should i set it?
if it means anything, this is for a mitsu 6g72 running the stock distributor with one coil (the msd)
Re: MSD blaster 3 coil settings
-
firefoxx04
- MegaSquirt Newbie
- Posts: 17
- Joined: Fri Jun 24, 2011 9:00 am
- Location: Michigan
Re: MSD blaster 3 coil settings
max spark duration is at .7ms but MSD tech said to put it at 350ms
are you saying i should run a max spark duration of 1 or 2?? im new to this stuff
Re: MSD blaster 3 coil settings
-
firefoxx04
- MegaSquirt Newbie
- Posts: 17
- Joined: Fri Jun 24, 2011 9:00 am
- Location: Michigan
Re: MSD blaster 3 coil settings
the tune i was looking at (is a daily driven tune) was .7 and msd says 350 so i guess it dosnt really matter
i tried to put something ridiculous (to get TS to use a default value and 8.5 was that value)