update caused 2 warnings

[yellowlt1ta]

I just updated my tunerstudio and I got 2 warning messages that say's:

Warning: taeRates row:3, col:0, value higher than maximum: 1540.0, set maximum value: 1000.0
Warning: AMCT_thresh row:0, col:0, value higher than maximum: 1800.0, set maximum value: 300.0

I don't know what this means can someone please help me out
Thanks, Dave

[LT401Vette]

The newer version of TunerStudio have some additional data validations. This includes checking all values when loaded from an msq to make sure they are in range, i.e. >= min and <= max as defined in the firmwares ini. If a value is found out of range a warning is issued and the value is set to the closest valid value. i.e. if greater than max, it will be set to max.

However this now means that you will get a difference report when TunerStudio connects to the controller as the values no longer match the settings in your controller.
- If you select Send TunerStudio Settings, then the invalid values will be corrected and you should see nothing more.
- If you select use Controller Settings, then TunerStudio will take the invalid settings from the controller and next time you load the msq and connect to the controller, you will repeat this scenario.

It appears that there are default settings in many of the older firmwares that were not in range, so if you have never used that feature they would still be be out of range or if you do a fresh firmware flash you will get these warning on the first connect.

[yellowlt1ta]

alright thank you very much.