Hello
MS2 B&G v2.89. I need to make shiflight and was wondering if i can do it simplest way possivble. I want to cut one of the three leds on fornt of MS like Accel LED, extend it on wiress to dashboard and put back the led, maybe use a bit bigger. Then give conditions on that port:
Accel LED (PM4):
Port PM4, enabled
variable = RPM > threshold = 6100, hysteresis = 100,
Power-on value = 0
Trigger value = 1
Will it work properly ? Can i go that way?
Best regards
Simple shift-light
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Simple shift-light
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Simple shift-light
WASyL,
Yes, that should work.
Lance.
Yes, that should work.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Re: Simple shift-light
good, very good thet will save me couple of bucks 
best regards
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3