Hi,
After crash of my MSII i had to re do my config and wanted to ask a question on Injection Timing Delay, i was playing with it but never notice a difference with different value. Ho should i calculate this one for my engine. it is SBC V8, 8 injectors each on cylinder.
Best regards
Injection Timing Delay
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Injection Timing Delay
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Injection Timing Delay
There is no calculation, it is a subjective thing that depends on your goals. And the effect isn't usually large, it is quite subtle in most cases. You might want to read this: http://www.megamanual.com/mt29.htm#sg
Lance.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Re: Injection Timing Delay
i read megamanual bilions of time but as english is not my native language understanding some technical stuff don't come easy. this is why i ask so that maybe someone will explain it in different words which i understand easier. i'll never know if i don't try.
best regards
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3