some one in the orlando fl area

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Payko0o
MegaSquirt Newbie
Posts: 21
Joined: Fri Feb 04, 2011 12:50 pm

some one in the orlando fl area

Post by Payko0o »

is there some one in the orlando area to help me tune
or some one to help over team viewer or something
1.5l turbo hundai
ms2 v 3 fuel only
tuner stuio
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: some one in the orlando fl area

Post by Matt Cramer »

Try Boles Motorsports.

http://www.bolesmotorsports.com/
Post Reply