VE table question

A forum for discussing the creation, modification, and loading of embedded code for B&G MS-I/MS-II.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
turbodrift
MegaSquirt Newbie
Posts: 1
Joined: Tue Jan 22, 2008 12:11 am
Location: Brisbane, Australia

VE table question

Post by turbodrift »

I'm looking for a VE table that is 16x16, which code if any can i find this in? I'm currently running 2.884 tuning using megatune. Does the upgrade for TS have this table as the basic does not?
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: VE table question

Post by Matt Cramer »

The VE table size is defined by the firmware, not the TunerStudio variant.

I'm not aware of any B&G code variants that have a 16 x 16 table. The only one I'm aware of is MS2/Extra, which has its own forum at msextra.com.
Top
Post Reply

Return to “MegaSquirt® Embedded Code”