help with which megasquirt set up to use!
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
oconnor65x
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Jan 28, 2013 10:31 am
help with which megasquirt set up to use!
hello i have a gen 1 chevy 350 and i want to convert to tpi with a t76 turbo on it running at 15 pounds of boost. i plan on using the ls1 wiring harness and adapting it to work with my engine applications. i am just curious as to which megasquirt product i should use. i am thinking about getting the v3 II kit and assembling it myself. just some quick questions though... when i order this product do i just put it together as the instructions say? will it be capable of running 90 lb injectors with aprox 83% duty cycle? i do know how to soder and i have wired basically rewired and repaired my entire wiring harness on my 69 camaro... this will be going into my 69 camaro. im just trying to get an idea of what i will need for this project thanks for any advice
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: help with which megasquirt set up to use!
Should be OK, but what are you using for ignition?oconnor65x wrote:hello i have a gen 1 chevy 350 and i want to convert to tpi with a t76 turbo on it running at 15 pounds of boost. i plan on using the ls1 wiring harness and adapting it to work with my engine applications. i am just curious as to which megasquirt product i should use. i am thinking about getting the v3 II kit and assembling it myself.
I'm not sure an LS1 harness would be all that helpful.
Yes.just some quick questions though... when i order this product do i just put it together as the instructions say? will it be capable of running 90 lb injectors with aprox 83% duty cycle?
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: help with which megasquirt set up to use!
83% means the injectors are pretty much the perfect size.
