Page 1 of 1
Gamma E driving me crazy..
Posted: Sun Mar 17, 2013 9:45 am
by Army of Six
How do you disable the gamma E as it relates to the IAT temps? it seems everytime it gets hot (IAT) the gamma e pulls fuel...up to 85% which causes a very very lean condition (afr 18:1). i have it currently setup to run with no O2 corrections so when the gamma e pulls out fuel it is un drivable. i simple do not want any IAT density corrections...heelp
Vic
Re: Gamma E driving me crazy..
Posted: Sun Mar 17, 2013 10:05 am
by Army of Six
sorry..i forgot to mention... MSII 3.0 mainboard running v2.889 im pretty sure. i have looked everywhere trying to figure out how to disable it to no avail.
Re: Gamma E driving me crazy..
Posted: Sun Mar 17, 2013 11:13 am
by Army of Six
also, my IAT based fuel correction table it zeroed out.
Re: Gamma E driving me crazy..
Posted: Tue Mar 19, 2013 4:46 am
by Matt Cramer
It sounds like you need to adjust the IAT based fuel correction to add more fuel at high IATs.
Re: Gamma E driving me crazy..
Posted: Thu Mar 21, 2013 5:51 pm
by Army of Six
thanks for responding Matt. thats basically what i have done..it just seems like a band aid fix though..but its working.
thanks
Re: Gamma E driving me crazy..
Posted: Fri Mar 22, 2013 4:34 am
by Matt Cramer
Why does it sound like a band aid fix? That is the right adjustment for correcting fuel based on IATs.
Re: Gamma E driving me crazy..
Posted: Fri Mar 22, 2013 5:27 pm
by Army of Six
i dont know..i guess the idea of adding fuel here to fix a problem with fuel being taken out from there. but if that is what i need to do then its fixed ;)
thanks again Matt.
Vic