Custom plug wires foe EDIS 6

jamesbryan · Post by **jamesbryan** » Wed Oct 30, 2013 10:48 am

Any vendor out here making custom EDIS spark plug wires. I tried making them myself......needless to say that was a waste of $$$ and time.

kjones6039 · Post by **kjones6039** » Wed Oct 30, 2013 3:28 pm

jamesbryan wrote:Any vendor out here making custom EDIS spark plug wires. I tried making them myself......needless to say that was a waste of $$$ and time.

Unlikely, I would imagine. Too many possible combinations, I would think (coil location, wire length, # of cylinders, etc), to make a manufacturer want to produce them. I have always made my own for EDIS and many others. IMO, the secret lies in having/using a proper crimping tool.

Just my thoughts of course............

Ken

trakkies · Post by **trakkies** » Wed Oct 30, 2013 3:36 pm

jamesbryan wrote:Any vendor out here making custom EDIS spark plug wires. I tried making them myself......needless to say that was a waste of $$$ and time.

I made my own. But like all crimp terminals you need a crimping tool. Among my collection was one for BNC video connectors. That worked a treat. They are cheap tools to buy as they are common.

Matt Cramer · Post by **Matt Cramer** » Thu Oct 31, 2013 5:04 am

You might want to contact Magnecor - they'll make custom wires for virtually any oddball ignition combination out there.

http://www.magnecor.com/magnecor1/main.htm

MSefi.com read only forum (Jan.15,2018)

Custom plug wires foe EDIS 6

Custom plug wires foe EDIS 6

Re: Custom plug wires foe EDIS 6

Re: Custom plug wires foe EDIS 6

Re: Custom plug wires foe EDIS 6