Page 1 of 1
D10 diode
Posted: Thu Nov 21, 2013 5:36 pm
by skip406
I just started building my ms2 v3.0 on step #13 it tells you to install d10 diode is this correct, i do not have a d10 diode and its not on the parts list.
Re: D10 diode
Posted: Fri Nov 22, 2013 1:28 am
by trakkies
D10 is a 1N4001 and there should be several of those in the kit. It is situated in the middle of the board close to the DB37 connector. MS won't work without it - it protects the 5 volt regulator from reverse polarity.
Re: D10 diode
Posted: Fri Nov 22, 2013 8:53 am
by skip406
Dave thanks for the info i figuard the bag dident get labeled,but i found it strange it wasant listed on the parts list in the manual.