Hello all. Finally getting around to putting my ms2 board together.
I got to the point of the first com check - power and com circuits done. Test with HPTE, and I get echo. Cool.
I proceed and install the clock and voltage sensing circuits, the crystal, and the processor daughterboard.
HPTE no longer talks to the port (no echo)
and the downloader gives me this
Download failed:
Expected response "
Boot>",
but received this "á".
the boot jumper is in place, and I have double checked all my joints and parts. Everything appears to be correct. Any idea what I'm missing here?
Thanks
problems using the update program assembling ms2 board
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
dahgzmikael
- MegaSquirt Newbie
- Posts: 7
- Joined: Sun Jan 13, 2013 10:51 pm
-
dahgzmikael
- MegaSquirt Newbie
- Posts: 7
- Joined: Sun Jan 13, 2013 10:51 pm
Re: problems using the update program assembling ms2 board
a screen of the downloader...
You do not have the required permissions to view the files attached to this post.
-
dahgzmikael
- MegaSquirt Newbie
- Posts: 7
- Joined: Sun Jan 13, 2013 10:51 pm
Re: problems using the update program assembling ms2 board
Oka y - I feel stupid.
I went back and double checked - heres where I'm at
Installed circuits -
Power
Com
Clock
Voltage Sensing
Hall Sensor Input (EDIS)
I have it jumpered for stepper IAC right now, I think. By I think, I mean this - all four (iac1a-js0, iac1b-js1, iac2a-js2, iac2b-js3) and s12c-js9.I was a little confused by the wording reguarding s12c, but concluded this is correct?
im using the DIYAutoTune adapter, and i get loopback with the jumper on the cable.
I also got loopback before i installed the cpu board and the clock and vs circuits, hooked up to the board with pins 12-13 jumpered on the socket.
Now, with the board installed, I don't.
if i plug into the ms and power it via new 9v from stim, the ig light turns on on the stim, and I get the error message show in the uploader.
Just trying to give some more information here in hopes of getting pushed in the right direction..
I went back and double checked - heres where I'm at
Installed circuits -
Power
Com
Clock
Voltage Sensing
Hall Sensor Input (EDIS)
I have it jumpered for stepper IAC right now, I think. By I think, I mean this - all four (iac1a-js0, iac1b-js1, iac2a-js2, iac2b-js3) and s12c-js9.I was a little confused by the wording reguarding s12c, but concluded this is correct?
im using the DIYAutoTune adapter, and i get loopback with the jumper on the cable.
I also got loopback before i installed the cpu board and the clock and vs circuits, hooked up to the board with pins 12-13 jumpered on the socket.
Now, with the board installed, I don't.
if i plug into the ms and power it via new 9v from stim, the ig light turns on on the stim, and I get the error message show in the uploader.
Just trying to give some more information here in hopes of getting pushed in the right direction..
-
dahgzmikael
- MegaSquirt Newbie
- Posts: 7
- Joined: Sun Jan 13, 2013 10:51 pm
Re: problems using the update program assembling ms2 board
and just to go ahead and solve that issue...on the ms code download page
http://www.megamanual.com/ms2/code.htm
the file downloads as "Monitor_v3.830a.abs.s19".
I found the list of older versions
"http://www.megamanual.com/files/code/"
and noticed theres no a after 830..
oops. Unless I'm crazy after trying to figure this out for 4 hours, someone might want to change that.
http://www.megamanual.com/ms2/code.htm
the file downloads as "Monitor_v3.830a.abs.s19".
I found the list of older versions
"http://www.megamanual.com/files/code/"
and noticed theres no a after 830..
oops. Unless I'm crazy after trying to figure this out for 4 hours, someone might want to change that.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: problems using the update program assembling ms2 board
It won't loop back with the MS2 daughter board in place unless you also jumper pins 12 and 13. When trying to load the firmware, are you using the boot jumper?
