MSefi.com read only forum (Jan.15,2018)

Okay, I'm running the free Lite version of MLV. I'm having issues running VE Analyze on my logs/MSQ.

For example, tonight's log is 9003 time stamped. Since I am running the Lite version, I'm restricted to 5000. So I go to the advanced settings and enter 4500 for remaining 4503 records. The VEAL finishes in 3 seconds. It says in the dialog box, "9002 records of 9003 filtered out due to Min Time setting". The VEAL does this with any min setting I put in over 500, be it RPM, min time, etc.

Also, the Live Tune feature of TunerStudio hasn't exactly been working for me either. I can understand the upper part of the table because it doesn't seem to matter what I do to AE it isn't right. But when I put in the AFR table that I want X cell to be 14.7 and the tuning program leaves it at 13.2, it bugs me.

I need to make a zip of today's log and current MSQ before I can post it from the other laptop. I will say right now that yes, my AFR table is set right... The MS2 is reading my Innovate LC-2 .4 lambda lean as compared to the Innovate gauge plugged into the same wires as the MS.

So I go to the advanced settings and enter 4500 for remaining 4503 records. The VEAL finishes in 3 seconds. It says in the dialog box, "9002 records of 9003 filtered out due to Min Time setting". The VEAL does this with any min setting I put in over 500, be it RPM, min time, etc.

The max number of records isn't the number used, but the total number. So it still won't use the ones after the min time.

Also, the Live Tune feature of TunerStudio hasn't exactly been working for me either. I can understand the upper part of the table because it doesn't seem to matter what I do to AE it isn't right. But when I put in the AFR table that I want X cell to be 14.7 and the tuning program leaves it at 13.2, it bugs me.

Do you mean the value in cell X is still 13.2, or that seems to be what the engine is still running at?

An msq would be most helpful.