best regards
ms2 + tablet + otg
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
ms2 + tablet + otg
i connect my windows based tablet thru ftdi usb-rs232 converter. i wonder if using this kind of cable will work or will cause any connection issues or can damage ms? or is there any way to mod ms so that it will charge my tablet that need about 2amps of current
best regards
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Re: ms2 + tablet + otg
bump, been a while bot still nobody knows?
best regards
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
Re: ms2 + tablet + otg
The 5v regulator on MS is only 500mA. There is 5v from this available at the serial connector, but I doubt it gets passed through the serial to USB adapator.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Re: ms2 + tablet + otg
and that means it:
1. will work just fine.
2. will not work a all.
3. will not work and MS might get damaged.
Pick one answer best to Your knowledge?
cause i don't understand Your answer, maybe my English is too poor to find the hidden answer
anybody can say more maybe?
best regards
1. will work just fine.
2. will not work a all.
3. will not work and MS might get damaged.
Pick one answer best to Your knowledge?
cause i don't understand Your answer, maybe my English is too poor to find the hidden answer
anybody can say more maybe?
best regards
Pontiac Firebird 305 LT1 intake, L82 cam
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: ms2 + tablet + otg
This probably won't cause damage to the MS2 - worst case is the USB to serial adapter may be hurt, but I don't see any way for a voltage problem to propagate past the USB adapter.
