Hello,
as I have seen some success stories on microsquirt (in 2008) I've bougth an MS-II to megasquirt my Porsche 944 Turbo.
The car has 2 VRs. 1st trigger wheel with 132 teeth no missing teeth and a reference wheel with single trigger 58.6 BTDC.
So I've taken the msq of the working microsquirt setup and set up my MS-II accordingly. (v3 board, using SW 2.920) The CPU setting I've changed to MS2.
But once I change the dual spark option to "M0 wheel with rising crank sync" and upload to the MS2 the D14 led starts to blink but I can no longer communicate with the MS.
It this setting only available to microsquirt?
I've built up a 2nd VR decoder with an LM1815 on the proto area and connected to JS10. And I wanted to use D14 as single spark output.
So my question is if there is any solution to use this setting with my MS2?
Many thanks!
Jimmy
Microsquirt features on MS2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.