MSefi.com read only forum (Jan.15,2018)

Alright, thanks. I just fired up the car, and it doesn't bounce like it did on the stim.

I finished my MS II, V 3 a bit ago, and I'm currently testing wheel trigger settings. I got it to read the RPM signal correctly, but it's very erratic. It'll hover at say 6500, then jump suddenly to 5500, and back up. I'm using a JimStim to test it currently on my desk. Any help? Also, do I have to ...

After messing with it, I got everything to read on megatune correctly. Far as I know, everything works and is correct. Thanks for the help.

I got it to connect, not too sure how though. I finished the board, and most things seem to be reading correctly. I can have RPM, TPS, O2 show up on megatune, but I'm missing a few things such as the CLT, MAT and voltage. Am I missing a part some where?

Well somehow I got it to work and load the code on it, but now I can't get it to read with MegaTune. I've loaded the correct settings into MegaTune but no luck. I understand it's only supposed to show voltage, but it still won't show that. I then tried Tuner Studio, and it worked fine, read the ...

The port is on 3. I've tried changing it to other ports also just in case, no luck.

The USB adapter from DIY.

I had D11 backwards on the board. :(

I fixed it, and am getting proper voltages now. but when I try to update, I get the following:

#!MSU-S19(Monitor_v2.850.abs.s19)
#!MSU-INI(megasquirt-II.ini)
Extracted C:/Program Files/MegaSquirt/car1/mtCfg\megasquirt-II.ini
C:\Program Files\Metrowerks ...

D10,D11 and D 13 all seem to be getting hot after being powered on for a bit of time.

I really messed this thing up..
S12 has 1.8v, S12C has 1.5v, Q9, Q12 and D3 has 1.8v. U5 has 1.5v, D9 has 2.7 mv.

S5 has 2.6v, prototype 5v has 2.6v, D9 has 3.1 mv, U5 has 5 mv, D19 has 2.7 mv, #1 and #20 have 2.7 mv and #31 has 41 mv.

I'm In the process of double checking all connections.

First time putting a MS together, and running into some problems. I'm at step 40 where it calls to upload the firmware. I do not get any luck with this at all. When I tried to run the update utility, I got the following:

#!MSU-S19(Monitor_v2.890.abs.s19)
#!MSU-INI(megasquirt-II.ini)
Extracted ...