MSefi.com read only forum (Jan.15,2018)

I got the car to start and run today .
I was smelling gas , the engine was full of it , changed the oil and filter ,checked plugs , one bank (1234 ) are firing good , and the other bank (5678)are soaked with fuel , starting to fill the crank case again .
I should be able to look at the data log ...

Well that was obvoiusly the wrong file .
I am not able to find he data log !!.
I did the file/datalog/record .
tried starting the car , it starts then dies after a few seconds .
I opened Excell , can't find the file .
Please help , I feel so dumb

Well today was a very good day for me .
I found the wires I needed to use to make the fuel pump work with the factory harness , still didn't work with MS , I opened it up again , and found the pump circuit , and low and behold I had a bridge of solder , cleaned that up , and pump worked when turning ...

66 FB how do I find the log , from mega tune ?
Thanks for the help .

Thank you , I have some time this evening , and will give it a shot .

I will give it a try .
Can you give me a clue as to where I am going to find this , and what it looks like? Thank you .
Ashley

I tried to get the car to run enough to get some data logging , but I am having to squirt fuel into the throttle body .
Only runs for a minute or so .I'll try to post up the msq , and the log from the brief time it ran .
All help is very appreciated car 1 3-30-09.msq
comm.log

I don't have a ...

Morning friends ,
Well I got my board built , and it passed all of the tests , and loaded software .
My problem is that the injectors don't seem to be opening .
I don't have a stim , but do have the car wired and everything is installed .
When I turn the key on , I get the quick flash of all 3 ...