MSefi.com read only forum (Jan.15,2018)

What kind of boost are you running?

Have you adjusted your AFM yet? Drilled the idle adjustment? spring tension?

There is alot of tuning ability on the stock ECU, I have a 94 truck 22RE EFI. I installed a Supra sized AFM on it to compliment the entire body of mods I have on the 84 model 22RE. The ...

Newish to posting on these forums, so first, HI! Thank you for reading and any assistance you can give!

Here is my set up. 1942cc Twincam 2TGTE (Factory style EFI manifold with a T3/4 turbo hanging off the side)
42x cc Supra injectors (High ohm)
EDIS
MS v 2.2 pcb currently running OLD code.
Relay ...

I've seen many repairs on a few MS boards. Research the jumpers, but you may find they are there not as a repair, but rather a mod. Looking at the pics, I'd say a mix of both. You could always build a new one and use this as a spare 'limp home mode' ECU if you are really concerned, but I would run ...

Use the MS board that you find is simplest. I run V2.2 Grippo boards in my once injected 2.2L Toyota truck. I first installed as a TBI system robbed from a Ford on the truck, I learned ALOT!

I would persuade you to use the 2.2 board MS1 as it is the simplest of the group, although the 3.0 board is ...

New to the forums but not so much to the Megasquirt 2.2 platform. I had a 22RE running Megasquirt, both via Ford TBI and 22re OEM-that was fuel only but the harness left much to be desired.

My *new* 8 year old project is a 1974 Toyota Corolla that has a 2TGE (Toyota twin cam 8v 2.0 4cyl with OEM ...