idle problems

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
fernan_01
MegaSquirt Newbie
Posts: 2
Joined: Fri Jul 29, 2005 5:11 am

idle problems

Post by fernan_01 »

Hello to everybody, im having problems with my cars idle im running a msI just for fuel and for some reason i cant get my car to idle below 1300 rpms if i try to lower the idle the engine would die and when im runing the car if the car goes below 1000 rpms it dies too above ,1300 rpms the engine runs beautiful. hope somebody can help me ... thanks
Fernando
fernan_01
MegaSquirt Newbie
Posts: 2
Joined: Fri Jul 29, 2005 5:11 am

Re: idle problems

Post by fernan_01 »

anybody?????????????
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: idle problems

Post by Matt Cramer »

Do you have a data log and MSQ you could share of the problem? That would be very helpful.
squatch88
MegaSquirt Newbie
Posts: 5
Joined: Fri Aug 08, 2008 10:02 pm

Re: idle problems

Post by squatch88 »

what is the motor in it?
Anyone can just turn the key and go, but it takes determination to understand why it goes!
Post Reply