Odd # of Cylinders Application
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Odd # of Cylinders Application
As I am still in the beginning of the learning curve I was wondering if you guys could shed some light for me.
Thanks!
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Odd # of Cylinders Application
Re: Odd # of Cylinders Application
Re: Odd # of Cylinders Application
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Odd # of Cylinders Application
Ok, if you have a distributor with a 5 tooth wheel inside it, this will be a lot like our water cooled VW install article:ejg3855 wrote:it has a distributor as I am not ready to drop the coin on coil over plug just yet.
http://www.DIYAutoTune.com/tech_article ... led_vw.htm
Some 5 cylinder Audis used flywheel triggering, which currently is not supported.
Re: Odd # of Cylinders Application

Distributor looks like such.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Odd # of Cylinders Application
Re: Odd # of Cylinders Application
Also can I use the Bosch BIP373 Coil Driver Mod Kit to drive this or do I not need too ?
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Odd # of Cylinders Application
Re: Odd # of Cylinders Application
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
