MS-II 3.0 2.890
91 crx with 97 prelude h22 drivetrain
8pin hei mod with msd tfi coil
using TS
i finally got spark, but wasn't firing. So i shot some starting fluid in, and it fired but wouldn't run. It died quick. What i know is timing is on, to the factory honda settings. I put the GREEN INJ1 wire to inj1 and inj3, and obviously BLUE INJ2 to inj2 and inj4.<-Is this correct?
Back to the VR wires coming off the HEI mod. I have a cyp(cam)has one trigger on it., ckp(crank) has 12 triggers evenly spaced, and tdc(also crank)has one trigger. Which one do I use. I think i am getting better results with the ckp. i would post up my file but not sure how.
anyhelp would be much appreciated
will fire on starting fluid, but thats it.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
corysplace
- MegaSquirt Newbie
- Posts: 22
- Joined: Wed Sep 22, 2010 11:15 am
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: will fire on starting fluid, but thats it.
I don't know your particular layout, but inline 4s are usually paired 1-4 and 2-3.
-
corysplace
- MegaSquirt Newbie
- Posts: 22
- Joined: Wed Sep 22, 2010 11:15 am
Re: will fire on starting fluid, but thats it.
thats what i originally thought, i will put it back that way.DonTZ125 wrote:I don't know your particular layout, but inline 4s are usually paired 1-4 and 2-3.
-
corysplace
- MegaSquirt Newbie
- Posts: 22
- Joined: Wed Sep 22, 2010 11:15 am
Re: will fire on starting fluid, but thats it.
here is a pic. of the inside of dizzy