Help me

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
gassermann
MegaSquirt Newbie
Posts: 1
Joined: Fri Feb 18, 2011 7:57 pm

Help me

Post by gassermann »

Hello: I have an unusual application. First the car i've been building for the last two years is just cool it's a 1963 corvette gasser and has been since 1963 so the class that i will be running is nostalgic
and it has rules one is if i use efi it can't be attached to distributor so i'm useing a crank sensor.I don't know exactly where to start so i will list parameters

1. 427 bbc
2. old school stack fuel injection just like hillborn but endrele i converted has 55lb venom inj. iat sensor and tps and coolant sensor
3. ingnition is vertex magneto which works great and i use resistor wires and resistor plugs so noise is not an issue
4. ms 2 2.880 i also added inovate single wideband 0-5 volt
5. also msd crank sensor it has 4 pulses per revolution

now that i have listed most info i'll explain whats happening i have ran engine and some luck but it has a lot more potential if i make it idle good i lose 2000-3000 rpm it has flutter
5000-7000 rpm work pretty good but what i would like to try is settings that you mega squirters feel would be applicable to my setup or if there are any tuners in the cincinnati
that want to make some money please answer or call me 513-383-5061 my name is Ed 8)
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Help me

Post by Matt Cramer »

Could you post a data log of the issue at 2000-3000 RPM? This will give us a recording of what is going on here. Also, if you included a copy of your MSQ, that would give us more to go on. I'll be glad to have a look at these.
Top
Post Reply

Return to “General Information”