Mounting the MS
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Mounting the MS
Where is a good place to mount the MS? I think I have read that you want to keep the wires as short as possible from the MS to the engine. I have read people put them inside under the dash. I don't have any room under the dash in my Grand Cherokee. I was thinking of putting it under the rear seat, but I am concerned how long the wires are going to be. Any opinions?
Re: Mounting the MS
Most vehicles are made for LHD and RHD, so have space on the passenger side where the pedals would go. A false bulkhead there gives a good place to fit the MS and any related bits behind. It also keeps cable runs to a minimum.JGC402 wrote:Where is a good place to mount the MS? I think I have read that you want to keep the wires as short as possible from the MS to the engine. I have read people put them inside under the dash. I don't have any room under the dash in my Grand Cherokee. I was thinking of putting it under the rear seat, but I am concerned how long the wires are going to be. Any opinions?
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband