Which diagram do I use?

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Brian Esser
MegaSquirt Newbie
Posts: 2
Joined: Sat Apr 08, 2006 10:12 am
Location: North Star, Ohio
Contact:
Contact Brian Esser

Which diagram do I use?

Post by Brian Esser »

Hi noob here!

I am installing MS1 on a 94' LT1 and I have ordered the 12' harness along with it. However according to the manual site, the harness I have appears to be the one listed for the Ver 3.0pcb. The wiring color codes for the 2.2pcb are different. Will this work if I wire it according to the wiring schematic for the ver 3.0 that matches the wiring colors? Or do I wire it according to the 2.2 diagram? :?: :RTFM: :?: :RTFM: :shock:
Top
Brian Esser
MegaSquirt Newbie
Posts: 2
Joined: Sat Apr 08, 2006 10:12 am
Location: North Star, Ohio
Contact:
Contact Brian Esser

Post by Brian Esser »

Thanks alot, I had a brain fart! :oops:
Top
Post Reply

Return to “Wiring and Sensors”