MSefi.com read only forum (Jan.15,2018)

I heard from the guy who runs the DIY auto-tune site that you have to retain the factory computer in a 2002 mustang to run the gauges. He also said i could use the stock computer to run the idle air control. I know i'll have to keep the stock computer for my alarm and auto door locks to work, but i'm a little worried about "sharing" sensors between the stock computer and the megasquirt controller. Does anyone foresee any problems with this application? This will be my daily driver and i would like to keep the stock gauge cluster

Thanks,
Scott

Does anyone at least know of someone who has done a similar integration so i can ask them a few questions?
I'm getting pretty close to starting this project, and i'm getting a little worried about using megasquirt without knowing more about how it will integrate with the factory ecu.

We have some general tips on what sensors to share and what sensors not to share in this article:

http://www.DIYAutoTune.com/tech_article ... rallel.htm

Thanks, that answered a lot of the questions i had
I wasn't aware of all of the tech articles, i will definitely bookmark it