Hi,
I own a kia picanto , a small engine 1000cc 4 cylinder 3 valves per cylinder model 2006. I recentrly turbocharged it and mechanically it works great , but i still have problems tuning fuel.
I was thinking of using megasquirt in its simplest form of managing only fuel and leaving ignition to stock ecu.
I 'm searching the whole forum but i can't find enough info. Is there any details on which sensors i have to use and which version of Megasquirt you think it would be better to use? Some people say that i only need rpm signal and othing else. Is it SO simple?? i just need the injector wires and rpm signal? how about idle valve?
Please help me, i feel a little stupid...
(Forgive my english i'm from greece)
thank you in advance
Megasquirt for fuel only on a kia picanto
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
stabmegane
- MegaSquirt Newbie
- Posts: 1
- Joined: Sat Dec 15, 2007 4:17 am
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Megasquirt for fuel only on a kia picanto
That's about it - you'll need an RPM signal and the MAP sensor built into the MegaSquirt. You will need a few other sensors as well. We have an article on installs that use both the MegaSquirt and the stock ECU here:
http://www.DIYAutoTune.com/tech_article ... dapter.htm
http://www.DIYAutoTune.com/tech_article ... dapter.htm
