Page 1 of 1
skyline rb25det r33 nissan help
Posted: Fri Dec 11, 2009 10:24 am
by torqueni
1st hello everyone . i am thinking of putting a megasqurit into an r33 skyline driftcar have done alot of reading up on this alot and now my head is fryed :blink: but i came across this site and i am looking for help 1st of all what do i need and can i run my spitfire coil packs . in the reading ive done it seems the best ecu is the ms2 v3.0
Re: skyline rb25det r33 nissan help
Posted: Tue Dec 15, 2009 8:53 am
by Matt Cramer
The easiest way to get this working would be to put a Ford style crank trigger on it and run an EDIS-6 ignition:
http://www.megamanual.com/ms2/EDIS.htm
I've seen EDIS modules used to drive COP coils but I'm not sure if it would work with Spitfire ones or not. I'd probably start off with a Ford coil pack to get it running and then try Spitfire coils.