The MegaSquirt Project has experienced explosive growth other the years, with hundreds of new MS installations occurring every week - a phenomenal success! MegaSquirt has been successfully used in all aspects of Internal Combustion engine applications including R&D, Industry, Race, and Research. The MS project has transformed itself from a simple R&D project into a full-featured mature engine control system. To reflect this the support structure has also changed to meet the needs of MegaSquirt Users.
Moving forward, the R&D forums for MegaSquirt project are in a read-only mode - no new forum posts are accepted.
However the forums will remain available for view, they still contain a wealth of information on how MegaSquirt works, how it is installed and used. Feel free to search the forums for information, facts, and overview.While the R&D forum traffic has slowed in recent years, this is not at all a reflection of Megasquirt users, which continue to grow year after year. What has changed is that the method of MegaSquirt support today has rapidly moved to Facebook, this is where the vast majority of interaction is happening now. For those not on Facebook the msextra forums is another place for product support. Finally, for product selection assistance, all of the MegaSquirt vendors are there to help you select a system, along with all of the required pieces to make it complete.
Forum rules Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
Within the EDIS setup manual in the MEgamanual it describes the settings for dwell times. I remember it being something like 5 M/s or 50% or something for Fixed dwell. I dont think you have to fiddle with that stuff;
The dwell settings do not apply if you have selected EDIS. The dwell is set by the EDIS module, and the length of the SAW signal sent by MS-II sets the advance. It is definitely NOT fixed dwell, etc. There's more here: http://www.megamanual.com/ms2/EDIS.htm and here: http://www.megamanual.com/mt28.htm#ib
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
