EGT & MS2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Walter_Dwelsdorf
- MegaSquirt Newbie
- Posts: 1
- Joined: Wed Nov 10, 2004 10:37 pm
- Location: Edmonton Alberta
EGT & MS2
Can you hook up 4 EGT,s to MS2? there are parts available but no info on how to hook it up. I would like to be able to have 4 EGT on our dragbikes and log to palm.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: EGT & MS2
The MS2 has only two unused analog to digital converters, so you can bring in a maximum of 2 EGT inputs there. To bring in four would require a CAN-enabled device like a GPIO board or one of Jean's I/O extenders that brings in the EGT readings over CANBus.
