new to megasquirt
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
new to megasquirt
but i am a little lost to what i have here, now the box is defo a megasquirt box as i have found the same ones on the net
but i cant find any info on it. so what i am here to ask for the moment is what version is mine ?
i have no manual or box or anything ! just the megasquirt and some wires. now the person has tried to solder it into the wiring loom in the engine bay and from what i can gather it is not correct. I have seen pictures on google that it is wired into the ecu side of things.
now first things first is to get a little info instead of being rammed with loads of info that i wont understand so if you could help me figure a few things out that would be a great help lads and i am sure you have seen this a few times but please help me out
thanks alot dom
Re: new to megasquirt
The manual is here.
Be sure to read Forum Rules here