Page 1 of 1
Bosch 25 Pin Porsche 928 LH/Ezf connectors
Posted: Mon May 23, 2011 3:53 am
by tampa 928s
I am looking for a source that has an Bosch 25 Pin Porsche 928 LH/Ezf connector. I want to build a interface to allow for Mega-Squirt-3 to be installed without cutting into the wiring harness. This would allow me to return to stock except for the Temp sensor to drive the car until the M/Q is dialed in. I need to be able to connect to the harness female 25-Pin and to the LH and Ezf with some type of interface. I cannot find anything on the net, any help would be appreciated.
Re: Bosch 25 Pin Porsche 928 LH/Ezf connectors
Posted: Mon May 23, 2011 4:06 am
by trakkies
Look for a secondhand ECU (perhaps faulty) and get the connector from that?
I dunno your particular one, but sourcing this sort of spare can be near impossible. Even if you know the maker (Tyco, etc) and even the part number, that maker might be under contract to only supply Bosch or whatever. I found this with a wiper motor plug for a BMW - Tyco part number on it - but NLA from BMW.
Re: Bosch 25 Pin Porsche 928 LH/Ezf connectors
Posted: Thu Jun 02, 2011 5:21 pm
by tampa 928s
I found a 25-Pin Diagnostic connector interface I have two extra ones to sell if anyone is interested.
It has two long cables with a box labeled with 25-pins to connect and test. Works and looks like a shop tool top quality must have been made for the Bosch 25-Pin Ecm.