RUNS!! but only for 3 to 4 seconds at a time.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
saberry0530
- MegaSquirt Newbie
- Posts: 10
- Joined: Wed Jul 06, 2011 7:00 am
RUNS!! but only for 3 to 4 seconds at a time.
Re: RUNS!! but only for 3 to 4 seconds at a time.
also i would go with a bit more spark advance at idle
best regards
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
-
saberry0530
- MegaSquirt Newbie
- Posts: 10
- Joined: Wed Jul 06, 2011 7:00 am
Re: RUNS!! but only for 3 to 4 seconds at a time.
THANKS WASyl!! As soon as I get back to the car, I'll make those corrections. I disabled the IAC just in case it was opening too much and causing the car go to lean. I richened the mixture by 30% across the board and WALLAH it started right up. , But it is still backfiring a little bit at idle (1100RPM )and a whole bunch when applying any throttle. I think that it will work itself out once I get the dwell and timing issues corrected. Anyone think that the 25.5 duration would cause the abnormally low dwell (1.2) and the backfiring?WASyL wrote:I assume that your engine is SBC350 with TPI system so why have you not enabled any Idle Control ? that might be a problem, trigger offset 10.7 ? and max spark duration 25.5? try rather 1.5-2.0 msec
also i would go with a bit more spark advance at idle
best regards
Re: RUNS!! but only for 3 to 4 seconds at a time.
best regards
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3
-
saberry0530
- MegaSquirt Newbie
- Posts: 10
- Joined: Wed Jul 06, 2011 7:00 am
Re: RUNS!! but only for 3 to 4 seconds at a time.
Still need to take it out on the highway and get some logs and O2 readings for larger throttle positions but overall not too bad. Thanks for all the help.
Re: RUNS!! but only for 3 to 4 seconds at a time.
best regards
MegaSquirt II with mod's + TPI adaptor board, MSExtra 3.3