No EDIS Spark

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
splatranger95
MegaSquirt Newbie
Posts: 9
Joined: Wed Aug 31, 2011 2:09 pm

No EDIS Spark

Post by splatranger95 »

Im running MSII with EDIS, Coil on Plug from a 4.6 Ford. I wired them in series, I have VR signal, and I cant find anything wrong with the EDIS hook up. EDIS is set in ignition settings, I have the timing set to 10 deg for now, But I cant get any spark out of it. Any ideas where to start?
Top
splatranger95
MegaSquirt Newbie
Posts: 9
Joined: Wed Aug 31, 2011 2:09 pm

Re: No EDIS Spark

Post by splatranger95 »

Bad VR sensor. I figured it out.
Top
trakkies
Super Squirter
Posts: 1162
Joined: Tue Dec 30, 2008 3:06 am
Location: SW London, UK

Re: No EDIS Spark

Post by trakkies »

splatranger95 wrote:Bad VR sensor. I figured it out.
Trouble is you said you'd set the timing. Not possible with a broken sensor.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Top
Post Reply

Return to “MS-II Ignition Setup, Tuning, and Troubleshooting”