MSefi.com read only forum (Jan.15,2018)

So i'm new to the whole tuning and ecu thing. I'm trying to figure out whats needed to run a standalone unit on a bmw bike, it is a 2 cylinder boxer motor with a tps sensor, 2 injectors, fuel pump, and a heated o2 circuit. The ignition is controlled by a crank pickup sensor.

Any help would be appreciated.

Nate

If you don't need a solder it yourself setup, I'd say a MicroSquirt would be the logical choice.

http://useasydocs.com/

Two spark outputs, two fuel outputs, and it's really tiny.