What sensors will I need for first up install.
Posted: Sun Jul 06, 2014 3:45 am
Hi All,
I am putting together a MS2 v3 as we speak. At this stage I have the board talking to the laptop but I have a long way to go. What I would like to know at this stage (so I can purchase them) is what sensors am I going to require. Detailed here is the setup I'm preparing for. The engine has individual throttle bodies, 4xLS1 coils (i read about a transistor mod I will require for this), fuel injected and will not be mating to any other OEM electronics.
I have read through the manual and just can't put my finger on what I am missing. Idle control valve is now non existent because of the ITB's, Manifold air pressure - well that's all gone too. What do other guys use with this setup.
Thanks for any help,
Mark.
I am putting together a MS2 v3 as we speak. At this stage I have the board talking to the laptop but I have a long way to go. What I would like to know at this stage (so I can purchase them) is what sensors am I going to require. Detailed here is the setup I'm preparing for. The engine has individual throttle bodies, 4xLS1 coils (i read about a transistor mod I will require for this), fuel injected and will not be mating to any other OEM electronics.
I have read through the manual and just can't put my finger on what I am missing. Idle control valve is now non existent because of the ITB's, Manifold air pressure - well that's all gone too. What do other guys use with this setup.
Thanks for any help,
Mark.